PTFE Coated Studs Bolts Blue Color

PTFE Coated Studs

PTFE Coated Studs

Introduction

 

Ptfe Coated Studs reduces the friction during use and reuse, it has brilliant anti- corrosive properties and increases the usage life of Fasteners.Ptfe Coated Studs’s provides exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal.Extensive testing and field use have proven that the future of coated fastener’s lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fastener’s were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries. The most widely used application is on B7 studss with 2H nuts.Dramatic improvements in efficiency, life expectancy and corrosion resistance are claimed to be imparted to Nut and Bolt connectors by the application of a low friction PTFE coating. Ptfe Coated Studs have out-performed all others in aggressive any noticeable effect. All the material used for Manufacturing is tested for chemical & mechanical properties. The Results are confirmed to meet original material requirement before processing.

PTFE Coated Stud

PTFE Coated Stud

Application

Ptfe Coated Studs have a well established reputation of doing brilliantly in the corrosive atmospheres prevalent in offshore oil and gas, offshore rigs & platforms, shipping, chemical, pharmaceutical, deep sea drilling, shipping, and marine, and power, and nuclear, electronic petrochemical, fluid.

PTFE Coated Stud

PTFE Coated Stud

Why use PTFE Coating

PTFE is non-stick, non-toxic self-lubricating and non-wetting,. It has brilliant anti-corrosive properties, superior heat resistant and has cryogenic constancy. All these properties of PTFE Coating creates a long term advantage for a Ptfe Coated Studs user.

PTFE Coated Stud

PTFE Coated Stud

The use of PTFE (polytetrafluoroethylene) Coated Studs Bolts Blue nonstick coatings is a two part system. Two coats are applied to the bolts, first a primer and next as a topcoat. Both PTFE coatings are essential to the long-lasting life of the fasteners. Ptfe Coated Studs possess the highest operating temperature of any fluoropolymer. Added benefits are a low coefficient of friction and good chemical resistance.

 

Range

We make vairety of PTFE Coated Bolts – B7 Studss & 2H Nuts.We also deal in PTFE Coatings on metal items, High Tensile Fasteners, Corrosion Resistance Coating, Fluoropolymer Lined Products, High Tensile Alloy Fasteners, High Tensile Fasteners, Ptfe Coated Bolts, Ptfe Coated Nuts, Ptfe Coated Studs.

PTFE Coated Studs Techincal Datasheet

Technical Specifications: Use Temperatures Working temp. range up to + 260°C
Corrosion Resistance Salt Spray (ASTM B117) up to 3,000 hrs (Nuts not frozen)
Pencil Hardness 5H – 6H (ASTM D3363-92A)
Kinetic Friction Coefficient 0.06 – 0.08
Thickness Nominal 0.001” (1 mil)
Impact 160 in lb (ASTM D2794-93)
Adhesion 5B (ASTM D3359-95)
Elongation 35%-50%
Tensile Strength 4,000 psi
Operating Pressure Up to 100,000 psi

 

Translate »