Ptfe Coated StudPTFE Coated Stud Bolts Blue Color

Introduction

Ptfe Coated Stud reduces the friction during use and reuse, it has brilliant anti- corrosive properties and increases the usage life of Fasteners.Ptfe Coated Stud’s provides exceptional corrosion resistance, low coefficient of friction, consistent tensioning and subsequent ease of installation and removal.Extensive testing and field use have proven that the future of coated fastener’s lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fastener’s were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries.

 

PTFE Coated Stud

PTFE Coated Stud

The most widely used application is on B7 studs with 2H nuts.Dramatic improvements in efficiency, life expectancy and corrosion resistance are claimed to be imparted to Nut and Bolt connectors by the application of a low friction PTFE coating. Ptfe Coated Stud have out-performed all others in aggressive any noticeable effect. All the material used for Manufacturing is tested for chemical & mechanical properties. The Results are confirmed to meet original material requirement before processing.

Application

PTFE Coated Stud
PTFE Coated Stud in Blue Color

Ptfe Coated Stud have a well established reputation of doing brilliantly in the corrosive atmospheres prevalent in offshore oil and gas, offshore rigs & platforms, shipping, chemical, pharmaceutical, deep sea drilling, shipping, and marine, and power, and nuclear, electronic petrochemical, fluid.

Why use PTFE Coating

PTFE is non-stick, non-toxic self-lubricating and non-wetting,. It has brilliant anti-corrosive properties, superior heat resistant and has cryogenic constancy. All these properties of PTFE Coating creates a long term advantage for a Ptfe Coated Stud user.The use of PTFE (polytetrafluoroethylene) Coated Stud Bolts Blue nonstick coatings is a two part system. Two coats are applied to the bolts, first a primer and next as a topcoat. Both PTFE coatings are essential to the long-lasting life of the fasteners. Ptfe Coated Stud possess the highest operating temperature of any fluoropolymer. Added benefits are a low coefficient of friction and good chemical resistance.

PTFE Coated Stud Techincal Datasheet

Technical Specifications: Use Temperatures Working temp. range up to + 260°C
Corrosion Resistance Salt Spray (ASTM B117) up to 3,000 hrs (Nuts not frozen)
Pencil Hardness 5H – 6H (ASTM D3363-92A)
Kinetic Friction Coefficient 0.06 – 0.08
Thickness Nominal 0.001” (1 mil)
Impact 160 in lb (ASTM D2794-93)
Adhesion 5B (ASTM D3359-95)
Elongation 35%-50%
Tensile Strength 4,000 psi
Operating Pressure Up to 100,000 psi

Range

We make vairety of PTFE Coated Bolts – B7 Studs & 2H Nuts.We also deal in PTFE Coatings on metal items, High Tensile Fasteners, Corrosion Resistance Coating, Fluoropolymer Lined Products, High Tensile Alloy Fasteners, High Tensile Fasteners, Ptfe Coated Bolts, Ptfe Coated Nuts, Ptfe Coated Stud.

Translate »