2 Way Manifold Valves, R2, Type-3

The purpose of the 2 Way Manifold Valves, R2, Type-3 is to isolate or block the flow of fluid in the system, so the fluid from upstream of the manifold does not reach other components of the system that are downstream, then bleed off or vent the remaining fluid from the system on the downstream side of the manifold. For example, a 2 Way Manifold Valves, R2, Type-3 would be used to stop the flow of fluids to some component, then vent the fluid from that component’s side of the manifold, in order to effect some kind of work (maintenance/repair/replacement) on that component. 2 Way Manifold Valves, R2, Type-3 with one block valve and one bleed valve is also known as an isolation valve or block and bleed valve; a block and bleed manifold with multiple valves is also known as an isolation manifold.

1) Available in ¾” and ¼”

Standard is ½”

2) Standard Threading is NPT

Also Available in BSP

Manifold Valve Two Way ,R Two Remote Mounting for Pressure gauges

2 Way Manifold with Plug

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Translate »